Canon CiRC2550, Service Manual

Page: 670 / 774

Chapter 17
17-67
RAW-DATA Sets whether to print out raw received data.
0: Normal operation [Factory default/After RAM clear]
1: Print out raw received data
2
RMT-LANG Used to select language of remote UI used from Web.
Select language code with + and - keys.
2
IFAX-LIM Used to select whether number of output lines will be restricted when largevolume data is received by IFAX.
0: No restriction
1 to 999 [Factory default/After RAM clear: 500]
2
SMTPTXPN Used to change SMTP send port number.
0 to 65535 (increments of 1)
[Factory default/After RAM clear: 25]
2
SMTPRXPN Used to change SMTP receive port number.
0 to 65535 (increments of 1)
[Factory default/After RAM clear: 25]
2
POP3PN Used to change POP receive port number.
0 to 65535 (increments of 1)
[Factory default/After RAM clear: 110]
2
ORG-LGL Use it to set a special paper size not recognized by the DF size detection mechanism.
settings
0: LEGAL
1: FOOLSCAP
2: A-FOOLSCAP
3: FORIO
4: G-LEGAL
5: OFFICIO
6: E-OFFICIO
7: A-OFFICIO
8: B-OFFICIO
9: A-LEAGAL
10: M-OFFICIO
[Factory default/After RAM clear: 0]
2
ORG-LTR Used to set special paper size not compatible with DF size recognition.
Setting values
0: LTR
1: G-LTR
2: A-LTR
3: EXECTIVE
[Factory settings and after RAM clear: 0]
2
ORG-B5 Sets special paper sizes that cannot be detected in ADF.
Setting values
0: B5
1: K-LEGAL
[Factory settings and after RAM clear: 0]
2
UI-COPY Use it to select whether to display the copy screen in the control panel.
Setting values
0: Do not display the copy screen.
1: Display the copy screen.
[Factory default/After RAM clear: 1]
2
UI-BOX Used to select whether to display operation panel box screen.
Setting values
0: Don't display
1: Display
[Factory default/After RAM clear: 1]
2
UI-SEND Used to select whether to display operation panel send screen.
Setting values
0: Don't display
1: Display
[Factory default/After RAM clear: 1]
2
UI-FAX Used to select whether to display operation panel fax screen.
Setting values
0: Don't display
1: Display
[Factory default/After RAM clear: 1]
2
SCR-SLCT Used to select half-tone process for photographic printing paper/photo mode.
Setting values
0: Use error diffusion method
1: Use low-line-count screen
2: Use high-line-count screen
[Factory default/After RAM clear: 1]
2
TMC-SLCT Used to select coefficient used in error diffusion process.
Setting values
0: Low granularity/low dot stability for Y/M/C/Bk
1: Y/M/C -> Low granularity, low dot stability, Bk -> high granularity, low dot stability
2: High granularity/low dot stability for Y/M/C/Bk
[Factory default/After RAM clear: 1]
2
DEVL-VTH Sets threshold value (video count) for starting toner forcible consumption sequence.
Whenever possible, avoid using this setting during normal operation.
2
COPIER>OPTION>BODY
Sub item Description level.