Chapter 4: Unit Management
Configuration SNMP
phn-3963_008v000
Page 4-6
3.
In the
SNMP Read Community
field, enter the community string for the SNMP read community.
4.
In the
SNMP Write Community
field, enter the community string for the SNMP write community
5.
In the
SNMP Trap Version
field, select
V1
,
V2
, or
V3
to specify the SNMP version.
Note
The
SNMP MIB Version
field displays the current SNMP MIB version the unit is using.
6.
In
the
V1V2 Blocked
field, select
Yes
if you want to block SNMPv1 and SNMPv2 access so that only SNMPv3
access will be enabled.
7.
Click
Apply
.
If you are using SNMPv3, you must also configure SNMPv3 users. SNMPv3 security parameters are configured per
SNMPv3 user.
To add an SNMP user:
1.
Select
Platform > Management SNMP > V3 Users
. The V3 Users page opens.
Figure 36
V3 Users Page
2.
Click
Add
. The V3 Users - Add page opens.
