Chapter 8: Synchronization
Configuring the Outgoing Clock and SSM Messages
phn-3963_008v000
Page 8-7
Figure 135
Outgoing Clock Page
2 Select
the interface you want to configure and click
Edit
. The Outgoing Clock – Edit page opens.
Figure 136
Outgoing Clock – Edit Page
3
In the
Outgoing clock source
field, select the interface's synchronization source. Options are:
o
Local Clock
– The interface uses its internal clock as its synchronization source.
o
System Clock
– Default value. The interface uses the system clock as its synchronization source.
o
Source Interface
– Reserved for future use.
o
Time Loop
– Reserved for future use.
4
In
Sync Radio Channel
field, use the default value of 0.
5
In the
SSM Admin
field, select
On
or
Off
to enable or disable SSM for the interface. By default, SSM is
disabled on all interfaces.
Note
In release 10.6, only
Off
is supported for
SSM Admin
.
