Chapter 15: Ethernet Services and Interfaces (CLI)
Configuring Ethernet Services (CLI)
phn-3963_008v000
Page 15-13
Table 90
Add Service Point CLI Parameters
Parameter
Input Type
Permitted Values
Description
sp-type
Variable
sap
snp
pipe
mng
SAP - Service Access Point
SNP - Service Network Point
PIPE - Pipe service point
MNG - Management service point
int-type
Variable
all-to-one
dot1q
s-tag
bundle-c-tag
bundle-s-tag
qinq
Determines which frames enter the service via this
service point, based on the frame's VLAN tagging.
Since more than one service point may be
associated with a single interface, frames are
assigned to the earliest defined service point in
case of conflict.
all-to-one - All C-VLANs and untagged frames that
enter the interface are classified to the service
point. Only valid for SAP service point types.
dot1q - A single C-VLAN is classified to the service
point. Valid for all service point types.
s-tag - A single S- VLAN is classified to the service
point. Valid for SNP and MNG service point types.
bundle-c-tag - A set of multiple C-VLANs is
classified to the service point. Only valid for SAP
service point types.
bundle-s-tag - A single S-VLAN and a set of multiple
C-VLANs are classified to the service point. Only
valid for SAP service point types.
qinq - A single S-VLAN and C-VLAN combination is
classified to the service point. Valid for SAP and
MNG service point types.
sp-id
Number
1-32 for P2P and
MP services.
1-30 for MNG
services.
This ID is unique within the service.
interface
Variable
eth
radio
The Interface type for the service point:
eth - An Ethernet interface.
radio - A radio interface.
When you are defining the service point on a
group, such as a LAG, use the group parameter
instead of the interface parameter.