Cambium Networks PTP 850E, User Manual

Page: 483 / 560

Chapter 19: Alarm Management and Troubleshooting (CLI) Uploading Unit Info (CLI)
phn-3963_008v000
Page 19-10
Parameter Input Type Permitted Values Description
server-ipv4 Dotted
decimal
format. Any valid IPv4 address. The IPv4 address of the PC or laptop you
are using as the FTP or SFTP server.
server-ipv6 Eight groups
of four
hexadecimal
digits
separated by
colons.
Any valid IPv6 address. The IPv6 address of the PC or laptop you
are using as the FTP or SFTP server.
directory Text String The directory path to which you are
exporting the unit information file. Enter
the path relative to the FTP or SFTP
user's home directory, not the absolute
path. If the location is the home
directory, it should be left empty. If the
location is a sub-folder under the home
directory, specify the folder name. If the
shared folder is "C:\", this parameter can
be left empty or populated with "//".
filename Text String The name you want to give the file you
are exporting.
Note: You must add the suffix .zip to
the file name. Otherwise, the file import
may fail. You can export the file using
any name, then add the suffix .zip
manually.
username Text String The user name for the FTP or SFTP
session.
password Text String The password for the FTP or SFTP
session. To configure the FTP or SFTP
settings without a password, simply
omit this parameter.
protocol Variable ftp
sftp The file transfer protocol.
The following commands configure an FTP or SFTP channel for configuration log export to IP address 192.168.1.99,
in the directory “current”, with file name “cfg_log”, user name “anonymous”, and password “12345.”