Cambium Networks PTP 850E User Manual Download Page 200

Page: 200 / 560

Chapter 7: Quality of Service (QoS)

Configuring WRED

phn-3963_008v000

Page 7-26

Figure 116

WRED Profile Page

Click

ADD

. The WRED Profile - Add page opens, with default values displayed.

Figure 117

WRED Profile - Add Page

In the

WRED Profile ID

field, select a unique ID to identify the profile. Permitted values are 1-30.

In the

Green curve min point

field, enter the minimum throughput of green packets for queues with this

profile, in Kbytes (0-8192). When this value is reached, the system begins dropping green packets in the
queue.

In the

Green curve max point

field, enter the maximum throughput of green packets for queues with this

profile, in Kbytes (0-8192). When this value is reached, all green packets in the queue are dropped.

In the

Green curve max drop ratio

field, enter the maximum percentage (1-100) of dropped green packets for

queues with this profile.

In the

Yellow curve min point

field, enter the minimum throughput of yellow packets for queues with this

profile, in Kbytes (0-8192). When this value is reached, the system begins dropping yellow packets in the
queue.

Summary of Contents for PTP 850E

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PTP 850E

Reviews:

Related manuals for PTP 850E

Brands by name

Popular brands

Cambium Networks PTP 850E, User Manual

Search results

Summary of Contents for PTP 850E

Reviews:

Related manuals for PTP 850E

Brands by name

Popular brands