Cambium Networks PTP 850E, User Manual

Page: 399 / 560

Chapter 16: Quality of Service (QoS) (CLI) Configuring Classification (CLI)
phn-3963_008v000
Page 16-10
Parameter Input Type Permitted Values Description
mpls-exp Number 0 – 7 The MPLS EXP bit to be mapped.
cos Number 0 – 7 The CoS assigned to frames with the
designated MPLS EXP bit value.
color Variable green
yellow The Color assigned to frames with the
designated MPLS EXP bit value.
The following command maps frames with MPLS EXP bit value of 4 to CoS 4 and Yellow color:
root> ethernet qos mpls-exp-bits-mapping-tbl set mpls-exp 4 cos 4 color
yellow
Configuring 802.1p Classification (CLI)
When 802.1p classification is set to Trust mode, the interface performs QoS and Color classification according to
user-configurable tables for 802.1q UP bit (C-VLAN frames) or 802.1AD UP bit (S-VLAN frames) to CoS and Color
classification.
This section includes:
• Configuring Trust Mode for 802.1p Classification (CLI)
• Modifying the C-VLAN 802.1 UP and CFI Bit Classification Table (CLI)
•
Modifying the S-VLAN 802.1 UP and DEI Bit Classification Table (CLI)
Configuring Trust Mode for 802.1p Classification (CLI)
To define the trust mode for 802.1p classification, go to interface view for the interface and enter the following
command:
eth type eth [1/x]>classification set 802.1p <802.1p>
To display the trust mode for 802.1p classification, go to interface view for the interface and enter the following
command:
eth type eth [1/x]>classification show 802.1p state