Chapter 15: Ethernet Services and Interfaces (CLI)
Configuring Ethernet Services (CLI)
phn-3963_008v000
Page 15-5
service info:
service id: 1
service type: p2p
service admin: operational
Maximal MAC address learning entries: 131072
default cos: 0
cos mode: preserve-sp-cos-decision
EVC id: N.A.
EVC description: N.A.
split horizon group: disable
configured multicast grouping: no
service[1]>
To display the attributes of a service and its service points, go to service view for the service and enter the
following command:
service[SID]>service detailed-info show
For example:
To display a list of service points and their attributes, enter the following command in root view:
root>ethernet service show info sid <sid>
Table 81
Displaying Ethernet Service Details CLI Parameters
Parameter
Input Type
Permitted Values
Description
sid
Number
Any defined Service
ID.
None
For example:
Configuring a Service’s Operational State (CLI)
To change the operational state of a service, go to service view for the service and enter the following command:
service[SID]>service admin set <service admin mode>
To display a service’s admin mode, go to service view for the service and enter the following command: