Cabletron Systems Netlink FRX4000, User Manual

Page: 59 / 426

Configuring Node-Wide Default Parameters 4-7
NetView Parameters
1
Up to 10 characters can be entered, but only the first 8 will be recognized by NetView.
2
Be aware that some NVMTs are larger than 265 bytes, so you may want to set the value
higher.
3
In multiples of 4.
4
Must be less than the value for
T1
to ensure that the remote link station will receive the
delayed acknowledgment before T1 expires.
Name
is the VTAM PU name that will identify the FRX4000/6000 as a NetView Service
Point.
Local Subscriber ID
is a subscriber address for the local end of an LLC2 session established for a NetView
connection. An
LLC2 Host record (see page 9-18) must be created, with
Session
Type = Terminated
and the same
Local Subscriber ID
and
Remote Subscriber ID
as spec-
ified here in the NetView parameters.
Remote Subscriber ID
is a subscriber address for the remote end of an LLC2 session established for a
NetView connection. An
LLC2 Host record (described on page 9-18) must be created,
with
Session Type = Originated
,
Local Subscriber ID
= the
Remote Subscriber ID
spec-
ified here in the NetView parameters, and
Remote Subscriber ID
= the
Local Subscriber
ID
specified in the NetView parameters.
Maximum Bytes per Frame
must correspond to the PIU size configured on the NetView host (parameter
MAXDATA of macro PU in VTAM).
Table 4-2 NetView Parameters
Parameter Valid Values Default Value
Name
up to 8 characters
1
none
Local Subscriber ID 0–15 characters none
Remote Subscriber ID
0–15 characters none
Maximum Bytes per Frame 25–4105 265
2
Local SAP Address
0–fc (hex)
3
04
Local MAC Address 0–ffffffffffff 000000000000
IDBLK 0–fff 000
IDNUM 0–fffff 00000
T1 0–250 (x 100 msec) 10 (1 sec)
T2 100–5000
(msec)
4
100
Ti
1–50 (sec)
30
N3 1–127 1
Tw 1–127 1
N2 0–255 8
Priority 0–9 0
Bandwidth Allocation Group 1–16 1