Cabletron Systems Netlink FRX4000, User Manual

Page: 72 / 426

5-10 FRX4000/FRX6000 4.0 User Guide, Rev 01
FRX6000 RLP Parameters
1
T1 and E1 LICs are supported only on the 8-MB RLP.
2
The size of each protocol and the amount of RLP memory determine the combinations
of protocols that can be configured on an RLP. (See explanation.)
3
Selecting this parameter changes the value to the next one in this list:
0–133 ft.
(0 dB),
133–266 ft., 266–399 ft., 399–533 ft., 533–655 ft., minus 7.5 dB, minus
15 dB, minus 22.5 dB.
4
Displayed only if
CRC-4 Disabled
is
N
.
5
Displayed only if
Chnl Signaling
is
Associated
.
Table 5-3 FRX6000 RLP Parameters
Parameter Valid Values Default Value
RLP Type None, RLP None
Line Interface Card 1, 2
None, RS-232, RS-422, V.35, T1-DSX1,
E1-75ohm, T1-RFU, E1-120ohm
1
None
Protocol "n" None, X.25, Frame Relay, Async,
SDLC, BSC-I, BSC-B, IP, SNMP, RIP,
LLC2, IPX, NVSP, BRIDGE
next in list not already
configured, among the
ones that will fit
2
T1 LIC Parameters
Line Coding B8ZS/AMI B8ZS
Framing ESF, D4 ESF
Line Service Full, Fractional Full
Line Build Out
see footnote
3
0–133 ft. (0 dB)
Clocking Master, Slave Slave
Base Chl Speed 56K, 64K 64K
Starting Chl Number
If
Line Service
=
Fractional: 1–24
I f Line Service = Full: n/a
1
(only if
Line Ser-
vice = Fractional)
Num of Chnls
If Line Service = Fractional: 1–24
I
f
Line Service
=
Full: n/a
24 (only if Line Ser-
vice
=
Fractional)
E1 LIC Parameters
Line Coding HDB3 HDB3
Framing G.704 G.704
Line Service Full, Fractional Full
Line Build Out G.703 G.703
Clocking Master, Slave Slave
Base Chl Speed 64K 64K
Starting Chl Number
If Line Service = Fractional: 1–30
I
f
Line Service
=
Full: n/a
1 (only if Line Ser-
vice
=
Fractional)
Num of Chnls
If
Line Service
=
Fractional: 1–30
I f Line Service = Full: n/a
30
(only if
Line Ser-
vice = Fractional)
CRC-4 Disabled Y/N N
Chnl Signalling Common, Associated Common
Ntnl Use Bit "n" On, Off Off
IntNtnl Use Bit 0, 1
4
On, Off On
CAS X1/2/3 Bit On, Off Off
CAS A/B/C/D Bit
5
On, Off Off