Cabletron Systems Netlink FRX4000, User Manual

Page: 188 / 426

11-2 FRX4000/FRX6000 4.0 User Guide, Rev 01
Configuring BSC Batch Port Records
Once the necessary Node, Line Processor, and protocol parameters have been con-
figured, press
[A]
at the Port Configuration Menu (or
[A], [C], [A]
from the Main Menu.
When prompted, enter:
●
(FRX6000 only) RLP containing the port:
0–7
. (The default is
0
.)
( RLP numbers are described in Chapter 5.)
●
Port (see port locations in Chapter 6):
0–7
. (The default is
0
.)
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See
Table 11-1 .) The fol-
lowing figure is an example of an existing port.
Figure 11-1 BSC Batch Port Record
[A],[C],[A]
from Main Menu
After making any changes, be sure to press
[F7]
to update the
system memory. Otherwise, the changes will not take effect until
the next re-boot of the FRX4000/6000.
Pressing
[J]
lists more parameters, and pressing
[K]
displays a screen similar to the fol-
lowing. (All BSC Batch parameters are listed in Table 11-1 .)
Node Name=nodexyz
BSC Batch Port Parameters (screen 1 of 2)
*
RLP: 0 Port: 5 Link State: Linkup
* I/O: V.35
Database System Memory
A Port Type BSC Batch BSC Batch
B Physical Port Interface V.35 V.35
C Blocked Port Flag N N
D Line Speed 9600 bps 9600 bps
E Retransmission Period (ms) 2000 2000
F Maximum Retransmissions 5 5
G Maximum Bytes per Frame 4105 4105
H Generate Clock Y Y
I Rcv Clock (TT) from DTE N N
J Batch Parameters - Screen 2
K Subscriber Information - Screen 3
L On-Line System Memory Changes
Y
Option: