Pressing
[G]
will display routing paths, which link the subscriber with one or more
ports. Pressing
[H]
will display the addresses used for call redirection. (These
addresses are valid only if
Y
is specified for one or more of items C, D, and E on the
first screen.) Parameters for all three screens are described following Table 10-3.
Subscriber Parameters
1
The software does not verify that the specified RLP/port exists. Make sure the specified
RLPs and ports are configured in the database, and that they actually exist.
Subscriber Name
identifies the subscriber to the console operator. The FRX4000/6000 software does
not use this information.
Routing Algorithm
allows creation of a "hunt group" of ports (see example on
page 8-24
), for the purpose
of routing per a pre-selected algorithm:
0
= Round Robin – selects ports specified cyclicly in numerical order according
to the list of Redirection Addresses. If the selected port is unreachable or con-
gested, the Call Request will be sent to the next port. (If the port becomes
available again, it will be included in its assigned position.)
1
= Alternate Route on Line Failure – selects the first port that is not in a failed
state. If the selected port does not make a connection, the call will be cleared, even
if other ports are available.
2
= Alternate Route on Line Busy – selects the first port that has LCNs available
(is not busy). If the port has failed, the next available port will be selected.
3
= Least LCN with Throughput – selects the line with the minumum loading, cal-
culated by weight and number of LCNs in use on that line. (Each line is assigned
a weight proportional to its throughput within the routing path.)
Table 10-3 Subscriber Parameters
Parameter
Valid Values
Default Value
Subscriber Name
0–31 characters
none
Routing Algorithm
0–3
0
Systematic Redirection
Y/N
N
Redirect on Busy
Y/N
N
Redirect on Out of Order
Y/N
N
Connection Priority
0–9
0
1st, 2nd,etc. Path Configured
Y/N
N
RLP
FRX4000:
0
1
FRX6000:
0–7
1
0
Port
Physical port:
0–7
1
Logical port:
8–63
1
0
Redirection Address 0,1,etc.
valid address
none
Summary of Contents for Netlink FRX4000
