Cabletron Systems Netlink FRX4000, User Manual

Page: 270 / 426

16-4 FRX4000/FRX6000 4.0 User Guide, Rev 01
Community Table Parameters
Name
is a community name, assigned by a network manager.
Access
determines what kind of access community members will have to SNMP messages.
Configuring Trap Routing
The "trap" task allows the SNMP manager to specify one or more IP addresses (up to
sixteen) to which the node's events (alarms) will be sent (as SNMP traps). To con-
figure trap routing, press
[C]
at the SNMP Configuration Menu.
Figure 16-3 SNMP Trap Routing Menu
[A],[A],[D],[C] from Main Menu
Table 16-2 Community Table Parameter
Parameter Valid Values Default Value
Name
0–24 characters none
Access Read only, Read/write Read only
Node Name=node_xyz
Trap Routing
A Seq B Address C Enabled D Severity E Delete
1 255.255.255.255 Yes 1
2 123.123.123.123 Yes 1
3 0.0.0.0 No 4
4 0.0.0.0 No 4
5 0.0.0.0 No 4
6 0.0.0.0 No 4
7 0.0.0.0 No 4
8 0.0.0.0 No 4
9 0.0.0.0 No 4
10 0.0.0.0 No 4
11 0.0.0.0 No 4
12 0.0.0.0 No 4
13 0.0.0.0 No 4
14 0.0.0.0 No 4
15 0.0.0.0 No 4
16 0.0.0.0 No 4
Option::