Cabletron Systems Netlink FRX4000, User Manual

Page: 67 / 426

Configuring Cards and Protocols 5-5
Line Build Out
is based on the distance from the FRX4000 to the external T1 device, and is normally
dictated by the telephone company that supplies the line.
Clocking
determines whether clock will be generated by the FRX4000 T1 port (
Master
) or the
remote device (
Slave
).
Base Chl Speed
determines the line speed over each channel.
Starting Chl Number
determines the lowest channel number that will be used.
Num of Chnls
is the number of channels that will be used on the T1 line.
E1 Parameters
Line Coding
is the line coding technique used to carry clock signals.
Framing
is the frame format. G.704 is a CEPT standard, with a set value.
Line Service
determines whether full or channelized T-1 will be run over the LIC port.
Line Build Out
relates to the distance from the FRX4000 to the external E1 device. G.703 is a CEPT
standard, with a set value.
Clocking
determines whether clock will be generated by the E1 port (
Master
) or the remote
device (
Slave
).
Base Chl Speed
determines the line speed over each channel.
Starting Chl Number
determines the lowest channel number that will be used.
Num of Chnls
is the number of channels that will be used on the T1 line.
CRC-4 Disabled
disables (if
Y
) the generation of CRC-4 (polynomial X4 + X + 1).
Chnl Signalling
is the mode of the CEPT interface.