Cabletron Systems Netlink FRX4000 User Manual Download

Page: 343 / 426

Statistics Displays

20-19

●

SAP Pkts Rcv

– is the number of SAP packets received on the interface.

●

SAP G_Query Rcv

– is the number of SAP General Queries received on the

interface.

●

SAP N_Query Rcv

– is the number of SAP Nearest Queries received on the

interface.

●

SAP G_Resp Rcv

– is the number of SAP General Responses (responses to

General Queries) received on the interface.

●

SAP N_Resp Rcv

– is the number of SAP Nearest Responses (responses to

Nearest Queries) received on the interface.

●

SAP Aged Entries

– is the number of entries that have been deleted from the

routing information table, due to expiration of the SAP Age Timer, configured
in the IPX Interface record.

●

SAP Prd_Broadcast

– is the number of periodic SAP messages broadcast from

this node advertising the available servers (from the server table in the
FRX4000/6000).

●

SAP Upd_Broadcast

– is the number of SAP messages broadcast from this node

to inform the network of changes to the server table.

●

SAP INV Net Rcv

– is the number of SAP packets received with an invalid

network address (one that does not match the network address configured on the
interface). These packets will be discarded.

●

SAP Worse Rt Rcv

– is the number of SAP packets received containing SAP

updates that are less efficient (worse) than the information in the server infor-
mation table.

●

SAP Ukn G_Query

– is the number of SAP General Queries received with an

invalid packet size. These packets will be discarded.

●

SAP Ukn N_Query

– is the number of SAP Nearest Queries received with an

invalid packet size. These packets will be discarded.

●

SAP Ukn G_Resp

– is the number of SAP General Responses received with an

invalid packet size. These packets will be discarded.

●

SAP Ukn N_Resp

– is the number of SAP Nearest Responses received with an

invalid packet size. These packets will be discarded.

●

NetB Pkts Rcv

– is the number of NetBIOS packets received on the interface.

●

NetB Pkts Tx

– is the number of NetBIOS packets transmitted on the interface.

●

NetB Ukn Pkts Rcv

– is the number of NetBIOS packets received on the interface

with an invalid size.

●

Lite Pkts Rcv

– is the number of NetWare "Lite" packets received on the

interface.

●

Lite Pkts Tx

– is the number of NetWare Lite packets transmitted on the

interface.

●

WD Req Pkts Rcv

– is the number of "watchdog," or "keep-alive," requests

received from other servers. These are issued periodically to all clients, to
determine whether each client is still available.

●

WD Resp Pkts Rcv

– is the number of received responses to keep-alive messages

issued by the local server.

●

Serial Pkts Rcv

– is the number of NetWare file server serialization security

frames received. These broadcast frames are used by Novell to hold information
regarding the licensing of the file server executables.

Summary of Contents for Netlink FRX4000











































































































































































































































































































































































































































Search results

Summary of Contents for Netlink FRX4000

Reviews:

Related manuals for Netlink FRX4000

Brands by name

Popular brands

Cabletron Systems Netlink FRX4000, User Manual

Search results

Summary of Contents for Netlink FRX4000

Reviews:

Related manuals for Netlink FRX4000

Brands by name

Popular brands