Brother MFC-J775DW Online User'S Manual Download Page 17

Page: 17 / 500

Stop/Exit

•

Press to stop an operation.

•

Press to exit from a menu.

Power On/Off

Press

to turn on the machine.

Press and hold down

to turn off the machine. The LCD will display

[Shutting Down]

and will stay on

for a few seconds before turning itself off. If you have connected an external telephone or TAD, it is always
available.

If you turn off the machine using

, it will still clean the print head periodically to maintain print quality. To

prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected
to a power source at all times.

8. Start buttons

Black Start

•

Press to start sending faxes in black & white.

•

Press to start making copies in black & white.

•

Press to start scanning documents (in color or black & white depending on the scan setting).

Color Start

•

Press to start sending faxes in full color.

•

Press to start making copies in full color.

•

Press to start scanning documents (in color or black & white depending on the scan setting).

Related Information

•

Introduction to Your Brother Machine

Summary of Contents for MFC-J775DW




















































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J775DW

Reviews:

Related manuals for MFC-J775DW

Brands by name

Popular brands

Brother MFC-J775DW, Online User'S Manual

Search results

Summary of Contents for MFC-J775DW

Reviews:

Related manuals for MFC-J775DW

Brands by name

Popular brands