Brother MFC-J775DW, Online User'S Manual

Page: 93 / 500

Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan Photos and Graphics
Scan Photos and Graphics
Send scanned photos or graphics directly to your computer.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software.
1. Load your document.
2. Press ( SCAN ).
3. Press
a
or
b
to select the
[Scan to Image]
option, and then press OK .
4. If the machine is connected over the network, press
a
or
b
to select the computer where you want to send
data, and then press OK .
If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer,
and then press
OK .
5. Do one of the following:
• To change the settings, go to the next step.
• To use the default settings, press Black Start or Color Start .
[Scan Type]
depends on the default settings. Pressing Black Start or Color Start does not allow you to
change the settings.
6. Press
a
or
b
to select the
[Scan Settings]
option, and then press OK .
To use the
[Scan Settings]
option, a computer with the ControlCenter software installed must be
connected to the machine.
7. Press
a
or
b
to select the
[Set at Device]
option, and then press OK .
8. Select the scan settings you want to change, and then press OK .
Option Description
Scan Type
Select the scan type for your document.
Resolution
Select the scan resolution for your document.
File Type
Select the file format for your document.
Scan Size
Select the scan size for your document.
Remove Background
Change the amount of background color that is removed.
87