Boston Whaler 20 Justice Series Operation & Maintenance Manual Download Page 65

Page: 65 / 140

3-11

Fuel Systems

Section 3

Fueling Procedures

Safety Warnings

DANGER

Gasoline vapor is extremely flammable and

highly explosive under certain conditions.

Always stop the engine and never smoke or

allow open flames or sparks within 50 feet (15

meters) of the fueling area when refueling.

DANGER

A discharge of static electricity can ignite

gasoline vapor, causing serious injury, death,

and destruction of property.

WARNING

This fuel system is not designed to support an

automatic “hands free” fuel nozzle. Never use

an automatic fuel nozzle to fill this tank and

never leave a fueling process unattended.

WARNING

The components in your boat fuel system are

designed to work with automotive gasoline

containing up to 10% ethanol, by volume.

Using automotive gasoline with higher

concentrations of ethanol will damage boat fuel

system components and might cause fuel

leaks.

CAUTION

Gasoline and oil spills are a safety hazard and

can contaminate the marine environment.

Never allow gasoline or oil to be discharged

into the water.

Summary of Contents for 20 Justice Series












































































































































Search results

Summary of Contents for 20 Justice Series

Reviews:

Brands by name

Popular brands

Boston Whaler 20 Justice Series, Operation & Maintenance Manual

Search results

Summary of Contents for 20 Justice Series

Reviews:

Brands by name

Popular brands