System load display
The system load display is shown when double-clicking on the diagnostic mon‐
itor.
The complete CPU load, the complete memory load and the CPU load of the
IndraWorks Operation are shown in this display.
Fig.4-15:
System load display
The logo is shown again when double-clicking again on it.
4.6
Status Bar
4.6.1
Structure of the Status Line
General
1
Status field
2
Line/column field
3
Insertion/overwrite mode
4
Status symbol field
5
System area: simultaneously opened applications of this operating area
6
Set language
Fig.4-16:
Overview of the status line
The status line is divided into two areas:
●
User-dependent area in which the data of the currently visible application
is shown
●
System area in which the global information of the operating area is visible.
Application-dependent Area
The application-dependent area consists of up to four panels whose content is
determined by the corresponding application. A description of the content can
be found in the corresponding application.
In general, the application-dependent area is divided into the following fields:
●
Status field [1]
This field displays status messages (gray), information messages (green)
and error messages (red).
This standard field exists in each application.
●
Line/column field [2]
This field displays the current line and column of an editor. Additional text
can be shown here in other applications.
This field does not exist in every application.
●
Insertion/overwrite mode [3]
For editors this area shows whether you are in "Insertion" or "Overwrite"
mode. Another text can be shown here in other applications.
Bosch Rexroth AG
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
32/301
Operating Elements