Fig.7-21:
Screen layout of a table editor
Headline
The headline shows the name of the table editor that is used, the directory and
the file name of the table.
Main Area
Correction values of an NC data table can be displayed and modified in the
main area of the table editor.
The correction sets of an NC data table are displayed in the lines of the table,
while the corresponding values of a correction set are shown in the columns.
Status Line
Fig.7-22:
Status line in table editor
The status line of the table editors is divided into various areas:
●
Information Area
●
Number of data records
●
Additive value entry
●
Table active
●
List of open windows in this mode
●
Current language
Information Area
By default, the information area displays the table name, including the path
information for the open table. Information text and error messages can also
be displayed here during operation.
Number of Data Sets
The number of displayed correction data records is shown in the 2nd field.
Additive Value Entry
The mode "Additive value entry" is shown in the 3rd field by the text "ADD" (see
chapter "Additive Value Entry " on page 144
Bosch Rexroth AG
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
142/301
Programming