7
Programming
7.1
Overview
NC program creation is described in this chapter.
Fig.7-1:
"Programming" operating area
7.2
NC Program Creation
7.2.1
Overview
NC program creation is conducted with the NC program editor. The NC program
editor can be opened several times in the operating area if required, to open
several NC programs. The NC program editor is aligned with the Windows
standard with regard to the usual key combinations (selecting, block com‐
mands, search, etc.).
It has the following basic characteristics:
●
Basic mechanisms to avoid data loss (BAK files).
●
Navigation: character by character, word by word, line by line, start, end
and via search function.
●
Slider function using slider bar, slider mouse, cursor positioning and keys.
●
Selection: character by character, word by word, line by line, entire file.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
Bosch Rexroth AG
113/301
Programming