Bizerba GLM-I, Instruction Manual, Page: 457 / 505

Instruction manual GLM-I Accessories
38.019.129.001 en 455
31
To open an existing tendency control parameter table for editing, enter and confirm
the tendency control parameter number of the desired table, see page 77.
31.14.4 Editing the tendency control parameter table
Tendency control parameter tables are edited the same way as generally described for ta-
bles.
Editing table, see page 79
Saving and closing table, see page 85
Printing table data, see page 83
31.14.5 Deleting tendency control parameter tables
This function is used to delete a tendency control parameter table, see page 86.
Mode level: 3 (local) or 4 (global)
<Etc> / <Tendency regulation> / <DeleteTend. regul.No.>
Enter and confirm a tendency control parameter number, see page 77.
To irrevocably delete the tendency control parameter table, answer security query
with <yes>.
31.14.6 Calling up tendency control parameter tables
Tendency control parameter tables are usually allocated to PLUs and automatically called
up whenever a PLU is changed. They can also be called up independently from the PLU
for the current labeling job.
Mode level: 1
<Device menu> / <Etc> / <Tendency regParamNo.>
Enter and confirm the tendency control parameter number for the desired table, see
page 77.
The selected tendency control parameter table is called up. All the settings here included
are applied to the current labeling job.
31.14.7 Modifying current tendency control parameters
This function is used to modify the currently applicable tendency control parameters in a
table. The changes only apply to the current labeling job and are not applied to the data-
base.
Mode level: 1
<Device menu> / <Etc> / <Tendency reg. editor>
Make changes.
Save table and exit, see page 85.