Bizerba GLM-I Instruction Manual Download Page 37 | Manualshive

Page: 37 / 505

Bizerba GLM-I Instruction Manual Download Page 37

Instruction manual GLM-I

Safety instructions

38.019.129.001 en

35

3

3.2.1

Main switch

The main switch of the device is located at the switch cabinet.
Switch the device off at the main switch in the following situations:
–

Imminent danger.

–

Cleaning and maintenance outside of the switch cabinet.

DANGER

Electrical voltage in the switch cabinet even when the main switch
is switched off!
Risk of death due to electrical shock.

–

Before carrying out work in the switch cabinet, disconnect the pow-
er connector.

–

Work in the switch cabinet may only be carried out by qualified
trade personnel or Bizerba service technicians.

WARNING

Compressed air supply remains on when device is switched off -
also if power supply is disconnected!
When working on the device risk of injury at compressed-air oper-
ated device parts.

–

Switch of compressed air supply before start working on the de-
vice.

Secure rotary switch against being switched on again.

Put a padlock through the main switch and lock it.

Secure key switch against being switched on again

Pull out power plug.
Please make sure through appropriate measures like a warning plate at the mains
plug that the power plug is no longer plugged in by unauthorized persons.

or

Separate on-site mains supply and secure against switching on again.

3.3

Plates on the device

The warning symbols listed in this chapter identify harzards which may occur during opera-
tion.

Unplug the mains plug

Remove the power plug before cleaning or before opening the
switch cabinet.

«
...
35
36
37
38
39
...
»

Summary of Contents for GLM-I


























































































































































































































































































































































































































































































































Reviews:

No comments