Bizerba GLM-I, Instruction Manual, Page: 199 / 505

Instruction manual GLM-I Numbers and values
38.019.129.001 en 197
17
17 Numbers and values
The chapter describes the following numbers and values that can be saved together with
the PLU data:
–
Product group number, see page 197
– Piece number per package, see page 198
– Printable numbers, see page 199
The production numbers that are independent from the article are de-
scribed in chapter "Enter production numbers" , see page 279.
17.1 Entering product group number
You can assign a product group number to a PLU in order to enable evaluations according
to product groups. Product group totals can be calculated via the product group number,
see page 296.
The product group number is entered as follows:
–
directly in the PLU data, see page 132
– via the function described below
If a product group number is assigned to the current PLU via the PLU data, the product
group number is called up automatically with the PLU and displayed on the softkey
<Pr. group number>.
Using the function described below you can either enter or change the product group num-
ber simply for the current labeling job, or save it under the PLU number of the current arti-
cle in the database. If you save it in the database, you must ensure that the relevant attrib-
ute is approved in the PLU database, see page 132.
Mode level: 2
<Article data> / <N values> / <Pr. group number>
Enter value.
To save the value in the article data, activate field "Save in database" .
If the field is not activated, the value is only used for the current labeling job.
When saving to the database, you might have to enter a password for mode level 3
(local) or mode level 4 (global).
Press <OK>.
The entered value appears on the softkey.