Bizerba GLM-I, Instruction Manual, Page: 32 / 505

About the device Instruction manual GLM-I
30 38.019.129.001 en
2
2.4 Identification plate
The identification plate is located at the scale under the weighing belt. The identification
plate may differ in design depending on device and country of installation.
1
Manufacturer, Type designation
2
CE identification and verification mark
3
Weights and Measures Office
4
EC type approval no.
5
Verification stamp
6
Electrical connection values
7
Permissible ambient temperature
8
Permissible pressure
9
Software identification
10
Maximum belt speed
11
Tare Balance range
12
Serial number
Illustration 2: Identification plate
2.5 Intended use
The device is designed for commercial and industrial use in multi-shift operations.
–
The device may only be used for labeling packaged products or foodstuffs.
– It may not be used to label unpackaged foodstuffs.
– It may only be used in industrial or commercial fields.
– The device may not be used in potentially explosive areas.
– The goods may only be fed to the scale using the device conveyor belts.
– The packages need to be fed continuously to the device with regular intervals be-
tween the packages. Packages must be arranged in such a way that the packages do
not get pushed together on the conveyor belts of the device.
– The packages must be positioned on the middle of the belt when they are conveyed
over the scale. Use the appropriate package guiding device. Please contact your Bi-
zerba trade consultant for details.
– The device must only be transported with appropriate means of transportation and if it
was secured accordingly.
– No constructional modifications must be made to the device.
– Do not stand on the device and do not use the belts as deposit station.
– Always operate the device with the conveyor belts. Dangerous spots are accessible
without conveyor belts.