Bizerba GLM-I, Instruction Manual, Page: 263 / 505

Instruction manual GLM-I Automatic machine parameters
38.019.129.001 en 261
20
20.6.4 Entering extension time of pressure roller
Type of labeler: <Belt labeler>
Mode level: 5
<Automat> / <Labeler> / <Labeler parameters> / <Belt labeler> /
<Moving time press.roller>
Enter value and confirm.
20.7 Delay for the external triggered labeler
Here you may enter an additional delay time for a stand-alone labeler that is activated by
an external signal. Labeling will be activated after receiving the external trigger signal and
once the defined delay time elapsed.
Mode level: 1
<Device menu> / <Labeler> / <Etc> / <Delay>
Enter value and confirm.
20.8 Conveyor unit
20.8.1 Switching on or off the auxiliary belts
Under certain circumstances, packages of critical dimensions must be laterally guided dur-
ing transport to avoid toppling over. For this reason, auxiliary belts can be mounted on the
transport belts. This function allows switching on and off the auxiliary belts. The following
settings are possible:
"On":
Auxiliary belts switched off. Standard setting.
"Off": Auxiliary belts switched on.
The conveyor belts are equipped with auxiliary belts which are activated.
Mode level: 1
<Device menu> / <Transport equipment> / <Supplement. belts>
Tap the softkey until the required setting is highlighted.