Bizerba GLM-I, Instruction Manual, Page: 139 / 505

Instruction manual GLM-I Article data
38.019.129.001 en 137
12
Enter new article number or set automatically via <Next availb. no.>.
If required: Enter customer number or set automatically via <Next availb. no.>.
Press <OK>.
An empty PLU date table appears.
You can also create a new article by calling up an existing article for
processing, editing data and save the article under a new PLU number
and customer number, if existing.
12.5 Opening article for processing
The article can be saved in the database as follows:
–
only under one PLU number
– under a fixed combination of PLU and customer number
The article call-up for labeling as well as the article call-up for processing, both depend on
the configuration of the database. Depending on the configuration the input window of this
function varies.
The articles can be called up as follows:
–
Call up via PLU number if no customer number is allocated to the articles.
– Call-up via PLU number and customer number if both numbers are required for identi-
fication.
Depending on the configuration the article can be searched by means of the following da-
ta, see page 77:
–
PLU number
– Customer No.
– Article text
Mode level 3 (local) or 4 (global)
Mode level 3: <PLU> / <PLU data local>
or
Mode level 4: <PLU> / <PLU data global only>
or
Mode level 4: <PLU> / <PLU data glob.+local>
Enter existing article number and customer number, if available or take it from a list,
see page 77.
or
Use <Article text> to open a list of available article texts, select an entry and confirm.
<OK>
The article data occur in the article data editor.