Bizerba GLM-I, Instruction Manual, Page: 470 / 505

Technical data Instruction manual GLM-I
468 38.019.129.001 en
32
Interfaces on GT-12C
System bus SB: for connection to Bizerba system network, connector: D-Sub 9-
pin (socket).
EDP 1: for software download, RS232, RS422, TTY, connector: D-Sub
9-pin (socket).
Ethernet: Connector: 10 base T, TCP/IP
32.10 Scale data
The technical data depend on the scale installed and are displayed on the verification
screen of the display.
Please write the displayed value into the table mentioned below, in order to access this
date in case of device failure.
Max 1. Weighing range:
2. Weighing range:
Min.
e 1. Weighing range:
2. Weighing range:
32.11 Package dimensions
The package height depends on the light barrier design at the conveyor belt.
Length Width Height
GLM-I 40 1T min.: 250 mm
max. 800 mm min.: 50 mm
max. 600 mm
min.: 10 mm
max. 250 mm
GLM-I 40 1S min.: 250 mm
max. 800 mm min.: 50 mm
max. 600 mm
min.: 10 mm
max. 600 mm
GLM-I
70/100/150/170 min.: 40 mm
max. 700 mm
1)
min.: 25 mm
max. 400 mm
2)
min.: 1 mm
max. 350 mm
1)
Depending on length of weighing belt.
2)
Depending on width of weighing belt
The minimum package height of 1 mm is only possible with an oblique
or vertical light barrier.