Bizerba GLM-I, Instruction Manual, Page: 189 / 505

Instruction manual GLM-I Date and time
38.019.129.001 en 187
16
16 Date and time
16.1 Packed-on, sell-by and use-by date
You can print three dates on labels. These are usually:
–
Packed-on date (date 1)
– Sell-by date (date 2)
– Use-by date (date 3)
Date 1 to Date 3 can be assigned differently, see page 191. For further
information please contact your Bizerba consultant or Bizerba Service.
Dates are entered or calculated based on the system time. On the softkeys in the display,
calculated and entered data are told apart by parentheses:
Date in parentheses:
calculated date
Date without parenthe-
ses: entered date
Enter the last two digits of the year number only. If you need further dig-
its, they are inserted automatically.
16.1.1 Enter date 1
Usually the system date at the time the label is printed as used as the packed-on date
(date 1). No input is required here. If necessary, you can enter date 1.
Mode level: 2
Enter date 1
<Date> / <Set date/ time> / <Date 1>
Enter value and confirm.
16.1.2 Enter date 2
The sell-by date (date 2) is usually calculated automatically from the system date and
shelf-life days 1 entered for the PLU. No input is required here. If necessary, you can enter
date 2.
Mode level: 2
Enter date 2
<Date> / <Set date/ time> / <Date 2>
Enter value and confirm.