28
Step 6: Door Assembly
Part 2
F:
On the outside face of the Door Assembly place Small Window in the window gap and attach with 8 (S13) #6 x
5/8” Pan Screws. (fig. 6.3)
G:
On the outside of the Door Assembly place 1 Door Handle centred over the top (2052) Door Cross, as shown
in fig. 6.3, then attach with 2 (S13) #6 x 5/8” Pan Screws.
H:
On the opposite side from the Door Handle, on the outside, place 1 Door Hinge flush to the top of the lower
(2052) Door Cross and 1 Door Hinge centred on (2053) Door Arch, as shown in fig. 6.3, then attach with 3 (S13)
#6 x 5/8” Pan Screws per hinge.
Note:
Hinge stops must be tight to the Door Assembly.
I:
On the inside of Door Assembly, measure 12-5/16” up from the bottom of (2057) Door Side Right and attach
Catch Plate using 2 (S18) #6 x 1” Wood Screws. (fig.6.4)
J:
Place a second Door Handle on the inside of the Door Assembly at approximately the same spot as the first
then attach with 2 (S13) #6 x 5/8” Pan Screws. (fig. 6.4)
Hardware
18 x
#6 x 5/8” Pan Screw
2 x
#6 x 1” Wood Screw
S13
Other Parts
2 x Door Handle
2 x Door Hinge
1 x Small Window
1 x Catch Plate
2052
Fig. 6.3
Outside View
2053
Door Handle
Inside View
Catch Plate
Fig. 6.4
S18
Small Window
Door Hinge
S13
x 8
2057
2057
S13
S18
S13
x 3 per
hinge
12-5/16”
S13
2052
Summary of Contents for ASHBERRY II F23073C
