Chapter 1
、
Product information
5
Output terminal
Standard
1 high-speed pulse output terminal (open-collector) that
supports 0–100 kHz square wave signal output
1 digital output (DO) terminal
1 relay output terminal
2 analog output (AO) terminals, support0 mA~20 mA current
output or 0 V~10 V voltage output.
Expanding capacity:
1 DO terminals
1 relay output terminals
Item
Specification
D
isp
lay
LED display
It displays the parameters.
Parameters copy
It can implement copy parameters function by PC software.
Key locking and
function selection
It can lock the keys partially or completely and define
thefunction range of some keys so as to prevent misoperation.
Protection mode
Motor short-circuit detection at power-on, input/output phase
loss protection, overcurrent protection, overvoltage protection,
under-voltage protection, overheat protection and overload
protection, etc.
E
nv
iro
nm
en
t
Installation location
Indoor, no direct sunlight, dust, corrosive gas, combustible
gas, oil smoke, vapor, drip or salt.
Altitude
Lower than 1000 m
Ambient temperature
-10°C~ +40°C (derated if the ambient temperature is between
40°C and 50°C)
Humidity
Less than 95%RH, without condensing
Vibration
Less than 5.9 m/s
2
(0.6 g)
Storage temperature
-20°C ~ +60°C
