Chapter 6 P0 group basic function
51
P0-04
Auxiliary
frequency
source Y selection
Same as P0-03 (main frequency source X
selection)
Default
：
0
When the auxiliary frequency source Y is used as an independent frequency
reference channel (X to Y switching), its usage is the same as that of the main
frequency source X P0-03. Note when the auxiliary frequency source is used as the
superimposed reference (the composite frequency of the main frequency source X
and the auxiliary source Y is given)
：
1
）
When the auxiliary frequency source Y is digitally given, P0-08 does not work. The
user adjusts the frequency based on the ▲, ▼ keys of the keyboard or the UP and
DOWN of the terminal directly on the basis of the main given frequency.
2) When the auxiliary frequency source is analog input AI1, AI2 or pulse input timing, the
frequency range is set by P0-05 and P0-06.
3) The selection of auxiliary frequency source Y and main frequency source X cannot be
set to the same channel, that is, P0-03 and P0-04 should not be set to the same value,
otherwise it will cause confusion.
。
P0-05
Auxiliary source Y
range selection when
superimposing
0: relative to the maximum frequency 1:
relative to the frequency source X
Default
：
0
P0-06
Auxiliary frequency
source Y range when
superimposed
0%
～
150%
Default
：
100%
When the frequency source is selected as frequency superposition (P0-07 is set to 1,
3 or 4), it is used to determine the adjustment range of the auxiliary frequency
source.
。
Note: If P0-05 is selected to be relative to the main frequency source X, the range of
the auxiliary frequency source will change as the main frequency X changes.
。