Chapter 4 Keypad operation
14
Chapter 4 Keypad operation
4-1 Description of the keyboard panel
Keyboard panel
Panel indicator description
RUN
When the light is off, the inverter is in the stop state. When the light is on, the
inverter is in the running state.
。
L/R
Keyboard operation, terminal operation and communication operation indicator, the
light off indicates the keyboard operation control status, the light is on indicates the
terminal operation control status, and the light flashes to indicate that it is in the
communication operation control state.
F/R
Positive and negative indicators, when the light is on, it indicates that it is in reverse
running mode.
TUNE
Tuning/torque control/fault indicator. When the light is on, it indicates that it is in
the torque control mode. When the light is flashing slowly, it indicates that it is in
the tuning state. If the light is flashing, it indicates that it is in the fault state.
Hz
Lights
indicate
frequency units
A
Lights up to indicate
current unit
V
The light is on to
indicate the voltage
unit
RMP
The Hz lamp and the A lamp are simultaneously lit to indicate the speed unit.
％
The A and V lamps are lit at the same time to indicate the percentage unit.
Unit indicator
Running indicator
Command source indicator
Light on: terminal control
Light off: key pad control
Blinking: communication control
Potentiometer
Programming button
Running
Tuning/torque control fault
indicator
Positive and negative indicator
Light on: reverse
Light off: forward
enter
Increment button
Shift button
Decrement button
Stop/reset button
Multi-function selection button
