manualshive.com logo in svg

BELL LABS INNOVATIONS Lucent Technologies Telica Plexus 9000, Planning And Engineering Manual, Page: 388 / 422

Share
Download
BELL LABS INNOVATIONS Lucent Technologies Telica Plexus 9000 Planning And Engineering Manual Download Page 388

Parts Information 

Plexus 9000 Planning and Engineering Guide 

Issue 16, June 4, 2004 

Section 130-400-000

 

8-6  

Telica, 

Inc. 

Part Number 

Description 

79-6021 

Billing and Traffic Collection Guide 

79-6022 

Maintenance and Troubleshooting Guide 

79-6026 

Billing and Traffic Collection Guide CD-ROM 

 
 

8.4.2  Module and System Part Numbers 

Table 8-E

 provides information about the module and which the software 

version that supports it.  

Table 8-F

 provides information about module and 

the chassis that supports it.  

Table 8-H 

lists the part numbers of modules of 

the Plexus 9000 in numerical order.  

Table 8-G

 provides information about 

functionality of the Switch Fabric when used with the single or dual 
System Processor and in the chassis with Midplane I or II.  

Table 8-I

 

provides a list of other part numbers. 
 

 

Note:  

Part numbers that are shaded in the tables have been “manufacture 

discontinued.”  They are, however, still supported. 
Part numbers that are shaded in the tables have “limited availability.”  
Contact your Telica Sales Representative. 

 
 

 

Note:  

Version 1.X was previously version 3.1.1.X; version 2.X was 

previous version 3.2.x; version 4.X was previously version 3.4.X. 

 
 

Table 8-E.  Software Version and Support of Modules 

Software Version 

Module 

Part 
Number 

1.
X.
X.
X 

2.
5/ 
6.
X. 

2.
7.
X.
X 

2.
8.
X.
X 

2.
9.
X.
X 

3.
5.
X.
X 

3.
6.
X.
X 

3.
7.
X.
X 

3.
8.
X.
X 

3. 
9. 
X. 
X 

3. 
10. 
X. 
X 

4. 
3. 
X. 
X 

5.
0.

X.

X 

89-0366-A 

Y Y N N N Y Y N N N N N N 

SP/TMG Front  

89-0366-B 

Y Y N N N Y Y Y N N N N N 

89-0389-A 

Y Y Y Y Y Y Y Y Y Y Y Y N 

Dual SP/TMG Front 
(SP-2)  

89-0389-B  Y Y Y Y Y Y Y Y Y Y Y Y N 

Dual SP/TMG Front 
(SP-3) (Note 3) 

89-0406-A N N N N N N N N N Y3 

Y Y Y 

89-0367-A 

Y Y Y Y Y Y Y Y Y Y N Y N 

89-0367-B 

Y Y Y Y Y Y Y Y Y Y N Y N 

SP/TMG Rear  

89-0367-C  Y Y Y Y Y Y Y Y Y Y Y Y Y 

Dual SP/TMG Rear 
(SP-3) (A-Links) 

89-0407-A  N

N N N N

N N N N N N N Y

Summary of Contents for Lucent Technologies Telica Plexus 9000







































































































































































































































































































































































































































Reviews:

No comments