Safety and Regulations
Plexus 9000 Planning and Engineering Guide
Issue 1, August 16, 2002
Section 130-050-200
1-4
Telica, Inc.
Warning:
Do not look at the laser beam projection area (e.g., end of
optical connector) with naked eyes or through optical equipment while
the power is supplied to this product. Otherwise, your eyes may be
injured.
Caution:
If this product is used under conditions not recommended in
the specification or this product is used with unauthorized revision,
classification for laser product safety standard is invalid. Classify the
product again at your responsibility and take appropriate actions.
1.4 Exemption
The Plexus 9000 is intended for tandem switching applications and as
such is exempt from CALEA requirements. The Plexus may not be
lawfully used in any application involving terminations directly to
individual subscriber stations without a waiver from the FCC.
Applications involving terminations to PBXs, channel banks or other
similar equipment, where calls to or from individual stations behind the
equipment can be uniquely identified, require a similar waiver.
Such waivers may be obtained by applying to the FBI's Flexible
Deployment Program Manager, CALEA Implementation Section, at 800-
555-0336 or 703-814-4700. The CALEA implementation group of the FBI
has informed Telica that trunks to a PBX that do not provide DID
capability or pass station ID to the Plexus are exempt from CALEA
requirements. A CALEA enhancement package will be available for the
Plexus in the last quarter of 2002.
1.5
Regulatory Compliance Notices
1.5.1 Federal Communications Commission Notice
1.5.1.1
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.