Belanger insta-KLEEN, Owner'S Manual

Page: 15 / 88

insta-KLEEN
™ MANUAL
1MANUL334
Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
9
Introduction
Environmental Parameters
•
Operating Temperature. This equipment will operate correctly in its intended ambient, at a
minimum b40ºF (+5ºC) and +104ºF (+40ºC).
•
Relative Humidity. The equipment will operate correctly within an environment at 50% RH,
+104ºF (+40ºC). Higher RH may be allowed at lower temperatures. Measures shall be taken
by the Purchaser to avoid the harmful effects of occasional condensation.
•
Altitude. This equipment will operate correctly up to 1000m above mean sea level.
•
Transportation and Storage. This equipment will withstand, or has been protected against,
transportation and storage temperatures of -13ºF (-25ºC) to 131ºF (+55ºC) and for short
periods up to 158ºF (+70ºC). It has been packaged to prevent damage from the effects of
normal humidity, vibration and shock.
Safeguards
The following items have been incorporated into the design of the wash as safety features to protect
the user and maintenance person.
WARNING - DO NOT OPERATE THIS EQUIPMENT WITHOUT ALL GUARDS
AND COVERS IN PLACE.
WARNING - DO NOT OPERATE DURASCRUBBER® WITHOUT SAFEGUARD
INSTALLED.
WARNING - DO NOT OPERATE INSTA-KLEEN ™ IN NORMAL OPERATION
WITHOUT LOCK PREVENTING ACCESS TO ICC CONTROLLER.
•
The dryer blowers have screens mounted to the inlet and outlets to prevent debris from
entering and exiting the blower as well as to prevent contact with body parts.
Reasonable and Foreseeable Misuse
The following conditions must be considered by the Owner Operator. It is his/her responsibility to
take precautions as described below.
•
Do not allow users who are under the influence of alcohol, drugs, or controlled substances
to use the wash.
•
Keep the wash bay clean and free of debris and objects that would confuse the user or
impede access into or out of the wash bay.
•
Instruct the wash user to not enter the wash with the vehicle windows and/or vehicle
doors open and to keep windows and vehicle doors closed throughout the entire wash
process.
•
Always instruct the wash user to remain in the vehicle throughout the wash process.
•
Ensure that the wash bay is well lit so wash users can safely use the wash.
•
Instruct the wash user to not use the wash if their vehicle has loose or broken parts that
may interfere with, damage, or result in unsafe operation of the wash.
•
Instruct the wash user that the damage to or incidents caused by aftermarket vehicle
components is not the responsibility of the wash owner or manufacturer.
•
Instruct the wash user to proceed slowly through the wash.
•
Instruct the wash user to never back up inside the wash bay.
•
Instruct personnel not to work on wash unless the entrance is blocked from vehicles
entering, this is in addition to all other safety precautions.