Belanger insta-KLEEN, Owner'S Manual

Page: 14 / 88

insta-
KLEEN™ MANUAL
8
Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
1MANUL334
Introduction
Operational Warning
Formulations containing the chemicals listed below are particularly dangerous and should not be
used even at low concentrations:
•
Hydrofluoric Acid
•
Ammonium Bi-fluoride
•
Bromic Acid
•
Muriatic Acid
•
Sulfonic Acid
•
Phosphoric Acid
•
Hydrogen Cyanide
•
Hydrochloric Acid
•
Chlorinated Solvents
Belanger, Inc., does not endorse or condone the use of chemicals that are potentially dangerous to
human health, the environment or property. Belanger recognizes that it is the right and sole decision
of the end user operators of our equipment as to the type and dilution ratio of the chemicals used in
their facilities. We strongly recommend that the end user does not select products containing any of
the chemicals listed above as an ingredient in the wash solutions. The chemicals listed above are
potentially dangerous to human health, and have a detrimental, deteriorating effect on the equipment
and the facility. Be advised that a portion of, or all of your warranty will be voided if you determine to
use any of the chemicals listed above as an ingredient in the wash solutions in conjunction with your
Belanger automatic car wash equipment:
Limitation (4), of Paragraph (8), Limited Warranty, of the Belanger Terms and Conditions of
Sales describes the potential limitation of warranty due to your chemical selection:
(4) This warranty shall be void for all equipment failures and premature component wear
caused by the use of corrosive chemicals in the wash process. The following list includes
some, but not all, of the particularly corrosive chemicals that if used in conjunction with
Belanger equipment will void the warranty: Hydrofluoric Acid, Ammonium Bi-fluoride, Bromic
Acid, Muriatic Acid, Sulfonic Acid, Phosphoric Acid, Hydrogen Cyanide, Hydrochloric Acid, and
Chlorinated Solvents. The Purchaser also agrees to accept the responsibility and liability for
the selection and use of any chemicals listed above;
However, should the end user decide to use formulations containing any of the above ingredients,
the end user should institute a comprehensive training program and implement detailed operational
parameters within their organization for the proper handling and treatment of such products to
minimize the potential dangers involved. Consult your chemical supplier for assistance in
establishing operational guidelines in the use of their products. MSDS (Material Safety Data Sheet)
should be obtained from the chemical supplier before using any chemical formulation.
CAUTION – DO NOT USE CHEMICALS THAT ARE CORROSIVE, CONTAIN
CONTAMINANTS, FOREIGN PARTICLES, AND/OR CORROSIVE ADDITIVES. DOING
SO WILL VOID MACHINE WARRANTY. CHEMICAL USED MUST BE COMPATIBLE
WITH LOCAL CODE REQUIREMENTS AND NOT HARMFUL TO PERSONS,
ANIMALS, OR THE ENVIRONMENT.