BECKWITH ELECTRIC M-3425A, Instruction Book

Page: 373 / 482

A–4
M‑3425A Instruction Book
System Communication Setup
Communication Setup
COM 1 (COM1 Communication Parameters are fixed except "Comm Response Time Delay")
Baud Rate: 9600 Data Bit: 8 Parity: None Stop Bit: 1 Protocol: BECO
Comm Response Time Delay: _____ 0 msec – 250 msecs [100]
COM 2
Baud Rate:
o
1200
o
2400
o
4800
o
[9600]
Data Bit: [8] (Fixed)
Parity:
o
[NONE]
o
ODD
o
EVEN
Stop Bit: _____ [1] or 2
Protocol:
o
BECO
o
[MODBUS]
Dead Sync Time: _____ 1 msec – 3000 msecs [50]
Comm Response Time Delay: _____ 0 msec – 250 msecs [100]
COM 3
Baud Rate: [9600] (Fixed)
Data Bit: [8] (Fixed)
Parity: [NONE] (Fixed)
Stop Bit: [1] (Fixed)
Protocol:
o
[BECO]
o
MODBUS
Dead Sync Time: _____ 1 msec – 3000 msecs [50]
Comm Response Time Delay: _____ 0 msec – 250 msecs [100]
Communication Address: _____ [1]
Communication (COMM) Access Code: __________ [9999]
ETHERNET
Ethernet Board:
o
[Enable]
o
Disable
DHCP Protocol:
o
[Enable]
o
Disable
IP Address: __________ [192.168.1.43]
Net Mask: __________ [255.255.255.0]
Gateway: __________ [192.168.1.1]
Protocol:
o
BECO (SERCONV)
o
[MODBUS]

NOTE
:
As Shipped
settings are contained in brackets [ ] where applicable.
Figure A-1 System Communication Setup