BECKWITH ELECTRIC M-3425A, Instruction Book

Page: 137 / 482

4–6
M‑3425A Instruction Book
IPScom User Access Code Setup
The relay includes three levels of access codes.
Depending on their assigned code, users have
varying levels of access to the relay features and
functions.
1.
Level 1 Access
= Read setpoints,
monitor status, view status history.
2.
Level 2 Access
= All of level 1
privileges, plus read & change
setpoints, target history, set time clock.
3.
Level 3 Access
= All of level
2 privileges, plus access to all
configuration functions and settings.
Each access code is a user-defined one-to-four
digit number. Access codes can only be altered by
a Level 3 user.
If the Level 3 Access Code is set to 9999, the access
code feature is disabled. When access codes are
disabled, the access screens are bypassed, and all
users have full access to all the relay menus. The
device is shipped from the factory with the access
code feature disabled.
To setup the relay User Access Codes perform the
following:

NOTE : Communication must be established with
the target relay for this procedure.
1. From the IPScom Main Screen menu
select
Tools/Security/Change User
Access Code . IPScom will display
the Access Level Code dialog screen
(Figure 4-4).
Figure 4-4 Access Level Code Dialog Screen
2. Enter a valid Access Code, then select
OK . IPScom will display the Change
User Access Code dialog screen
(Figure 4-5).
Figure 4-5 Change User Access Code Dialog
Screen
3. Enter the desired User Access Code(s)
(1-9999), then re-enter (confirmation)
the desired User Access Code(s).
4. Select
Save
, IPScom will display an
Access Code change Confirmation
Screen (Figure 4-2).
5. Select
Yes , IPScom will display an
Access Code Was Changed Successfully
Confirmation Screen (Figure 4-3).
6. Select
OK
, IPScom will return to the
Main Screen.