manualshive.com logo in svg

Beckman Coulter LS 13 320, User Manual

The Beckman Coulter LS 13 320 is a high-performance particle size analyzer, designed to provide accurate and reliable measurements. Ensure successful operation of this advanced instrument by downloading the user manual for free from manualshive.com. This comprehensive manual is your go-to resource for all the information required to maximize the potential of your LS 13 320.

Share
Download
background image

PN B05577AC

  

6-67

Sample Modules

Universal Liquid Module  

6

ULM Description

The ULM system consists of:

 •

The ULM module

 •

Two hoses: one for fluid delivery and another for waste.

The ULM requires relatively small volumes of sample and dispersing liquid (total volume 125 mL). It 
is compatible with both organic and aqueous media. The set point for the obscuration is user 
selectable or may be attained automatically as the sample is added to the vessel.

This sample module has the capability of auto-filling and auto-rinsing using a self-contained 
internal pump. The pump is controlled by an automated level sensor that signals when the 
container is full or empty. The pump fills and rinses the unit automatically, expelling all waste into 
a waste container (provided with the module).

Loading the ULM

1

Open the LS 13 320 door to load the ULM by undocking the auto-docking tray. Press the 

OPEN

 

button on the instrument and the sliding door moves to the left. When it is open, press the 

EJECT 

MODULE

 button to extend the tray toward the user.

2

In the auto-dock tray, you will notice stainless steel pins extending into the center tray area 
both at the back of the tray and in the front of the tray. These pins fit into slots on the ULM. The 
back pins prevent the module from tipping out and the forward pins secure the module in the 
tray.

Summary of Contents for LS 13 320































































































































































































































































Reviews:

No comments

Related manuals for LS 13 320

Yamaha HR-VP48U Quick Start preview
HR-VP48U
Brand: Yamaha Pages: 3
Xylem TM 40 Operating Manual preview
TM 40
Brand: Xylem Pages: 24
Gazelle G9407-Log Operating Instruction preview
G9407-Log
Brand: Gazelle Pages: 2
QuadTech 1855 Instruction Manual preview
1855
Brand: QuadTech Pages: 76
Vaisala HUMICAP HMP155 Quick Manual preview
HUMICAP HMP155
Brand: Vaisala Pages: 2
Varian CP-4900 Micro-GC Preinstallation Manual preview
CP-4900 Micro-GC
Brand: Varian Pages: 7
Vapotherm precision flow Quick Reference Manual preview
precision flow
Brand: Vapotherm Pages: 2
Varian CP-4900 Micro-GC Firmware Update Manual preview
CP-4900 Micro-GC
Brand: Varian Pages: 13
Yamaha Arius YDP-160 Midi Data Format preview
Arius YDP-160
Brand: Yamaha Pages: 6
Orange Electronic P451 Manual preview
P451
Brand: Orange Electronic Pages: 21
Ecolab LMIT09/S209 Short Operating Instructions preview
LMIT09/S209
Brand: Ecolab Pages: 95
Flowmetrics 922-MFC Installation And Operating Instructions Manual preview
922-MFC
Brand: Flowmetrics Pages: 102
POSEIDON PVH2365 User Manual preview
PVH2365
Brand: POSEIDON Pages: 13
Bitzer KT-170-4 Technical Information preview
KT-170-4
Brand: Bitzer Pages: 8
Hanna Instruments HI 9810 Instruction Manual preview
HI 9810
Brand: Hanna Instruments Pages: 11
LaserLiner LaserRange-Master T4 Pro Operating Instructions Manual preview
LaserRange-Master T4 Pro
Brand: LaserLiner Pages: 68
EIJKELKAMP 14.36 Operating Instructions Manual preview
14.36
Brand: EIJKELKAMP Pages: 11
Sontex Superstatic 749 Instructions For Use Manual preview
Superstatic 749
Brand: Sontex Pages: 24

Brands by name

Popular brands

Load more brands