BeaconMedaes MedPlus TotalAlert, Operation And Maintenance

Page: 144 / 376

10. Choose the type of gas or vacuum label (CV) and the message label (CS) that
you need for each input from the provided labels.
11. Place the gas or vacuum label (CV) on top of the message label (CS).
12. Slide the labels (CS) and (CV) into the appropriate opening (CT).
13. Put the end of the label with the text closest to its edge into the opening first.
NOTE:
The labels are for either the left-hand or right-hand side.
14. For more information about installing an original alarm network, refer to the
MedPlus TotalAlert® Alarm Network Installation Instructions .
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728) Page 1-131
Local Alarm Labeling
Chapter 1: Introduction
1