BeaconMedaes MedPlus TotalAlert, Operation And Maintenance

Page: 88 / 376

6. Click on the
OK
button. If you log in successfully, the screen displays:
You
are Logged in. Close your browser to log out.
7. When you are ready to log out, close the browser.
WARNING:
Change the factory-programmed password after the first time you log in.
Otherwise, inappropriate personnel may change the setpoints and endan-
ger patient welfare.
8. After you log in for the first time, change the User 1 Name and Password.
NOTE:
For security reasons, only User 1 has access to change user names and pass-
words.
9. For User 1 to configure the list of users, click on the Administer Users link.
The User Administration page displays (see figure 1-25 on page 1–75).
Figure 1-25. User Administration
10. Click in the
User 1 Name
window under the
User Name
column.
11. Type in the name of the first user in that window.
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728) Page 1-75
Configuring and Browsing the Master Alarm Using the Web Pages
Chapter 1: Introduction
1