BeaconMedaes MedPlus TotalAlert, Operation And Maintenance

Page: 92 / 376

Figure 1-28. Alarm Step 2—Gas Type Setup
5. Click on the type of gas or vacuum being monitored at this input.
Using a custom message in the Gas Type window is an option (see figure 1-29
on page 1–80).
NOTE:
If you want a custom message in the Gas Type window, click on Custom as the
type of gas then type in the message you want displayed.
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728) Page 1-79
Configuring and Browsing the Master Alarm Using the Web Pages
Chapter 1: Introduction
1