B&R Automation PC 620, User Manual

Page: 63 / 594

Technical data • Entire device
Secti
on 2
Te
chn
ica
l da
ta
63 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.4 APC620, 5 PCI slot variant
2.4.1 Interfaces
Figure 16: Interface overview - APC620, 5 PCI slot variant (top)
Warning!
Do not remove the mounting screws from the heat sink, as it is connected to the
processor and chipset by a thermal coupling. Should this connection be broken, the
APC620 must be sent for repair. Removal of the mounting screws, which can be
determined by a broken seal, voids all warranty.
During operation, surface temperatures of the heat sink may reach 70°C (warning
"hot surface").
VOID W
A
RRANTY
IF SEAL
BROKEN
060003861
COM 1
COM 2
Ethernet 1
Ethernet 2
USB 1, USB 2
MIC, Line IN,
Line OUT
PCI slot 5 - half-size
PCI slot 2 - half-size
PCI slot 4 - half-size
PCI slot 3 - half-size
PCI slot 1 - half-size
Power
HDD
Link1
Link2
LED for:
Supply voltage
+24 VDC
Add-on interface slot
Heat sink
Heat sink seal
Warning
1) Can only be used with a 5PC600.SX05-00 system unit.
AP Link slot
1)
Monitor / Panel
SDL (Smart Display Link) / DVI
2) Slot only provided on 5PC600.SX05-00 devices with Rev. F0 or higher and 5PC600.SX05-01 with Rev. F0 or higher.
Add-On UPS slot
2)