Maintenance / Servicing • Fan kit installation and replacement
Section 7
Ma
inte
nanc
e /
Servic
ing
501
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
•
The fan connection cable must be connected to the main circuit board at the right position
(fan 1 at position 1, fan 2 at position 2).
•
If one or more PCI cards were previously in place, they can now be re-inserted.
•
If a slide-in drive was previously in place, it too can now be re-inserted.
•
Place the dust filter in the fan kit cover and secure with the filter clasp.
•
Replace any removed components (filter kit cover, side cover) in the reverse order.
Figure 254: APC620 2PCI slots - Fan cable connection to the main board
Figure 255: Dust filter in the fan kit cover and filter clasp
1
2
1
2
Filter clasp
Dust filter
Fan kit cover
Summary of Contents for Automation PC 620
Page 2: ...2 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 4: ...4 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 6: ...6 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 568: ...568 Appendix A Glossary Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...