B&R Automation PC 620, User Manual

Page: 243 / 594

Commissioning • Connection examples
Section 3
Com
m
is
sio
ning
243 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
4.9 Four Automation Panel 900 units via SDL (AP Link) and RGB (onboard)
A CRT monitor (max. UXGA) is connected to the integrated monitor/panel interface (onboard)
via RGB. Four additional Automation Panel 900 units (max. UXGA) are connected to the optional
SDL transmitter (AP Link). The Automation Panels must be the same type. The two lines display
different content (Extended Desktop), but panels show the same content (Display Clone).
USB is supported up to a maximum distance (SDL segment 1 + SDL segment 2) of 30 m on the
first two panels (front and back side). From a distance of 30 m and longer, USB is only available
for the first panel. USB devices can only be connected directly to the Automation Panel (without
hub).
Figure 102: Configuration - Four Automation Panel 900 units via SDL (AP Link) and CRT (onboard)
✓
✓
Automation PC 620
with AP Link
5AC600.SDL0-00
Link: 5DLSDL.1000-01
USB OK
Graphics Engine 1
analog RGB
x
Internal APC620
panel number
SDL segment 1
max.40 meters
Link: 5DLSDL.1000-01
USB
possible
Link: 5DLSDL.1000-01
Link: 5DLSDL.1000-00
8
9
10
11
USB
not possible
USB
not possible
SDL segment 2
max.40 meters
SDL segment 3
max.40 meters
SDL segment 4
max.40 meters
AP Link
connection
Monitor / Panel
connection
Independent of segment length
Depends on segment length
Not supported
analog RGB