B&R Automation PC 620, User Manual

Page: 116 / 594

116
Technical data • Entire device
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.13.15 +24 VDC supply voltage
The Automation PC 620 has a 24 VDC ATX compatible power supply. Depending on the system
unit, the power supply provides the following maximum performances (in watts).
The 3-pin socket required for the supply voltage connection is not included in delivery. This can
be ordered from B&R using the model number 0TB103.9 (screw clamp) or 0TB103.91 (cage
clamp).
The pin assignments can be found either in the following table or printed on the APC620 housing.
The supply voltage is internally protected (10A, fast-acting), so that the device cannot be
damaged if there is an overload (fuse replacement necessary) or if the voltage supply is
connected incorrectly (reverse polarity protection - fuse replacement not necessary).
System unit Max. power
at + 5 V
Max. power
at + 3V3
Max. power
at + 12 V
Max. power
at - 12 V
Max.
total power
5PC600.SX01-00 55 23 12 1.2 70
5PC600.SX02-00 55 23 12 1.2 70
5PC600.SX02-01 55 23 12 1.2 70
5PC600.SF03-00 105 46 24 1.2 110
5PC600.SX05-00 105 46 24 1.2 110
5PC600.SX05-01 105 46 24 1.2 110
5PC600.SE00-00 55 23 12 1.2 55
5PC600.SE00-01 55 23 12 1.2 55
5PC600.SE00-02 55 23 12 1.2 55
Table 47: Power supply depending on the system unit
Supply voltage
Protected against reverse polarity 3-pin, male
Pin Description
1 +
2 Functional ground
3 -
Accessories
0TB103.9 Plug 24 V 5.08 3p screw clamps
0TB103.91 Plug 24 V 5.08 3p cage clamps
Figure 35: Supply voltage connection
P o w e r 24 VDC
+
-
1 2 3