346
Software • Location of the DIP switch in APC620 system units
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
3. Location of the DIP switch in APC620 system units
To get to the DIP switches, it is necessary to open the front cover. To do this, loosen the five Torx
screws (T10) marked and pull the cover off towards the front. Then the DIP switches can be
accessed at the location marked in yellow. The setting can now be made using a pointed object.
If the system has a slide-in drive, it must be removed first to get to the DIP switches.
Warning!
The following procedure is only permitted with the power switched off and the
supply voltage disconnected!
Figure 158: Location of DIP switch
Summary of Contents for Automation PC 620
Page 2: ...2 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 4: ...4 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 6: ...6 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 568: ...568 Appendix A Glossary Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...