B&R Automation PC 620 User Manual Download Page 352

Page: 352 / 594

352

Software • Automation PC 620 with Windows XP Professional

Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10

6.1.1 FAQ

Installation on PCI SATA RAID controller - 5ACPCI.RAIC-03

The following steps are necessary for installing Windows XP Professional on the PCI SATA
RAID controller:

1) Download the RAID driver from the B&R homepage (

www.br-automation.com

) and copy

the files to a diskette.

2) Connect the Media Drive (5MD900.USB2-01 or 5MD900.USB2-00) to the USB port.

3) Insert the diskette and Windows XP Professional CD in the the Media Drive and boot from

the CD.

4) Press the F6 key during setup to install a third-party SCSI or a driver.

5) Press the "s" key when asked about installing an additional drive. Insert the disk in the floppy

drive. Press "Enter" and select the driver.

6) Follow the setup instructions.

7) The setup copies the files to the Windows XP Professional folder and restarts the APC620.

Summary of Contents for Automation PC 620



















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Automation PC 620

Reviews:

Related manuals for Automation PC 620

Brands by name

Popular brands

B&R Automation PC 620, User Manual

Search results

Summary of Contents for Automation PC 620

Reviews:

Related manuals for Automation PC 620

Brands by name

Popular brands