378
Software • B&R Automation Device Interface (ADI) driver - Control Center
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
7) Click
OK
.
8) The text field beside
System
(on the
UPS
tab in the
Control Center
) also indicates whether
the B&R UPS driver is active.
10.4.2 Displaying UPS status values
1) Open the
Control Center
in the
Control Panel
.
2) Select
UPS
tab.
The displayed values are updated automatically.
3)
Select UPS monitor
to display UPS status changes since the last time the system or UPS
driver was started.
The dialog box is updated automatically when the status changes.
To remove a status from the list, click on
delete
.
Information:
•
Administrator rights are required in order to change the energy options or
display the UPS status.
Information:
The "reversed battery polarity" status is only displayed in UPS firmware version 1.08
or higher.
In UPS firmware Version 1.07 or smaller, a change between battery operation and
normal operation can lead to communication errors.
Figure 175: ADI Control Center - UPS monitor
Summary of Contents for Automation PC 620
Page 2: ...2 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 4: ...4 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 6: ...6 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 568: ...568 Appendix A Glossary Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
